Inside the Production of High-Quality Makeup Case: A Look at the Production Process Flow Chart
As consumers, we often don't think much about the manufacturing process of the products we use on a daily basis. However, for those in the manufacturing industry, the production process is an essential aspect of creating high-quality products that meet the needs and expectations of their customers. In this article, we will take a closer look at the production process flowchart for creating quality cosmetic case, from raw materials to finished product.
Raw Material Warehouse: Outsourcing Purchased Materials
The production of high-quality makeup vanity requires several raw materials, including aluminum, various hardware accessories, coils, and various fabrics and lining materials. These materials are stored in the raw material warehouse until they are needed in the production process.
Mold Department: Creating the Molds for the Handles
One of the critical components of a cosmetic case is its handle. To create the handle, the production team first makes a set of paper grids. They then create a set of iron molds according to the size of the paper grid, which is then moved to the stamping machine or cutting machine. A single set of 20-80 sets of materials can be opened in this process.
Open Machine: Opening the Materials
The open machine is used to open leather, fabric (ABS fabric), lining fabric, cardboard, and other materials, allowing dozens of sheets to be opened at a time.
Demolition Bending Machine: Bending the Cardboard
Some materials, such as special cardboard, need to be demolished and bent into a certain degree of curvature using a demolition bending machine.
Stamping Machine
Stamping the Small Hardware Pieces. The stamping machine is used to stamp small pieces of hardware that are essential components of the case.
Cutting Machine: Cutting the Aluminum Strips
Different kinds of long aluminum strips are cut into the required length using a cutting machine.
Woodworking Room: Shaping the Medium Fiber Board
All hard case are shaped using medium fiberboard. The whole board is open material into small boards of different sizes, which are then fixed into the shape of the case or case that is needed using glue.
Semi-Finished Products - Case Production
The case is wrapped with two layers of material, a layer of cardboard (which is moisture-proof) and a layer of fabric. Following the 1-2-3-4-5 smooth filling, the cosmetic case becomes a tray. The tray silver aluminum strip is then fixed with the case nail.
Semi-Finished Products - Outside the case
The same process used for the inside of the rolling case is used for the outside, but with a heavier aluminum alloy frame and hardware assembly. The surface of the wooden board is laminated with a decorative material. The single piece of material and aluminum strips are combined, and then nail with other corresponding hardware accessories. Each side is then connected with aluminum frames, and a part of the make up case is completed. The front and back of the case, as well as the upper and lower parts, are then combined, brushed with glue, laminated on the inside, and connected to the tray with the rolling case.
Take the Light Makeup Rolling Case as an Example: The Internal Structure of the Production
The production team creates an empty case without internal lamination. They then do around the strip, with professional electricians laminating some electrical components. Different processes are used, including a power test. The inner lining is then created using a needle car group. This process creates soft and hard combination case (2 in 1 that) or soft packages that are then packed into boxes.
In conclusion, the production process flow chart described above provides a comprehensive overview of the various steps involved in creating high-quality cosmetic case and other products. From raw material acquisition and storage to the final assembly and packaging, each step requires precision and attention to detail.
It is worth noting that this process is not only applicable to the train case manufacturing industry but can also be adapted to other industries that require precision manufacturing. By following this process, businesses can increase their efficiency, reduce waste, and improve the overall quality of their products.
If you are in the manufacturing industry, consider implementing this process flow chart in your own business to achieve better results. And if you are a consumer looking for high-quality trolleys or other products, make sure to ask your supplier about their manufacturing process to ensure that they are following industry best practices.
In today's competitive business landscape, it is essential to prioritize quality and efficiency in order to stand out from the competition. By implementing a comprehensive production process flow chart like the one described above, businesses can achieve these goals and ultimately improve their bottom line.